Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
- Ball-inflating needle for footballs, basketballs and more
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Mounting Kit for Mountain Morph and Turbo Morph G.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Mounting kit for Mini Morph and Road Morph G.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Spare mounting bracket for 2018 Air Tool frame pumps.
$5.95 - $9.29
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Replacement O-ring for Serfas floor pumps
Replaces worn end on any pump hose. - Head Type: Schrader
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
$9.00 - $18.00
Specialized's Threaded CO2 Cartrdiges can be used with Specialized CPRO2 Trigger and Air Tool COMBO2 pump inflators.
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Klic Co2 head/cartridge adaptor replacement
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
These compact, non-threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
These compact, non-threaded 16-gram cartridges work compatible CO2 inflators and pack easily into your seat bag.
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Airship and most other manufacturers' inflators that use unthreaded cartridges.
Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.
$10.50 - $12.60
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Replacement pump head for Serfas floor pumps. Compatible with: - TCPG - TCPG Plus - FP-200 Classic
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket
These compact, threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
$13.47 - $21.99
20 grams of Genuine Inovations' exclusive size CO2 cartridge. Specifically designed for your larger volume 29ers, mountain and fat bike tires. These non-threaded CO2 cartridges work great with the Ultraflate (#G20310) and Full Metal Jacket (#G20440) inflators. Available in a 2-pack or 6-pack!
$13.50 - $104.98
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
$15.00 - $21.15
Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.
Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.
$15.98 - $233.45
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
- Comes with Dual Head - Compatible with all Planet Bike floor pumps - #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head
• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps
A spring-loaded, push-on inflation system compatible with all 3/8-inch threaded compressed gas cartridges and works for Presta or Shrader valves. - Press-on for both Presta and Schrader valves - Compact, lightweight and durable - Compatible with standard 3/8-inch threaded compressed gas cartridges - CNC-machined AL-6061 - Kit comes with two 20-gram CO2 cartridges
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Page 1 of 6 Next page