Bags & Racks

The Benno High Rail rack add on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes Compatible with: - Categories: Boost EVO 3, Boost EVO 2, Boost EVO 1, Carry On - NOT compatible with Boost EVO 4 and later!

- Disc-brake-compatible leg for Delta's Megarack racks - Designed to give rack extra clearance around disc brake caliper

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

Replacement bracket and hardware for Origin8 Classique and Rush front cargo racks

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

• Vinyl coated hooks • 9 mm diameter • Black

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

- Mount: Bracket only

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Disc brake compatible leg for Megarack

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Replacement strut kit for Sunlite headset mount wire baskets. Compatible with Sunlite part numbers 90302 - 90309.

Replacement leather strap for wicker and wood baskets

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

The KEG Storage Vessels allows you to store all key emergency gear-like patches, an extra tube, a micro tool, and a CO2 cartridge-all in one rigid, durable 16oz container that easily fits into any Specialized bottle cage. - 16oz container made from durable, BPA-free PETE Material. - Wide 63mm opening makes it easy to place and retrieve items from inside KEG. - Featuring a "stash cap" on the underside of KEG lid, providing an ideal place to store patch kits. - Printed with non-solvent based inks (UV Cured), CPSC-approved ink.

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length

- Fits Sunlite 4506/45119 alloy racks