Filter By:
- Show More Brands
- Show Fewer Brands
Stems
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$34.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
$36.99 - $50.00
$50.00
Up to 26% Off
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
$44.99
$60.00
25% Off
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio.
- 3D-forged and CNC-machined 6061 alloy construction
- 4-bolt oversized 31.8mm handlebar interface with relieved faceplate
- Compatible with carbon composite handlebars
$49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts
- Stack Height: 39mm
- Weight: 155g (60mm)
$29.99 - $40.49
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.
- Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Machined logo on bar clamp
$36.99
MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards.
- Tested to ISO 4210 Mountain standards
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation
$29.99 - $36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$29.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g
$30.00 - $36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$35.00 - $36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$40.00
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy.
- At least 37mm of steerer is required
- Does not require a stem cap. Longer compression bolt included
- Not compatible with carbon steerer tubes
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like.
- Stack height: 75mm
- Not recommended for use with carbon steerer tubes
$42.00 - $43.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
$40.99
The Odin stem features a 48mm reach and a 36mm rise.
- Mark Burnett signature stem
- Cold Forged & CNC Machined 6061-T6 Alloy
- Heat Treated 6mm solid hex bolts
$39.99
The Treymone stem features a 51mm reach and a 27mm rise.
- Trey Jones and Simone Barraco signature
- Heat treated cro-mo M8 6mm solid hex bolts
- Cold forged & CNC machined 6061-T6 Alloy
$29.39
• Forged aluminum
• Classic streamlined shape
• 2-bolt clamp
• 180mm tall
$25.19
• Aluminum head
• Stainless-steel 180mm-tall shaft
• 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill
• Single-bolt clamp
$20.99
• Steel
• Polished-chrome finish
• 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill
• 10-inches tall (extra tall)
$39.89
- 3D forged 6061 alloy road stems in 6 or 17 degree angles
- Lightweight 4 bolt faceplate
- Material: AL6061-T6
- Finish: Sandblasted
$39.99
The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt.
- Weight: 11.2-ounce
- Reach: 50mm
- Stack Height: 30mm
- Rise: 31mm (Upright) / 2mm Drop (Invert)
- Clamp Bolts: 8 x 1.25mm hardened chromoly (x4)
- Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)
$23.99
STC (Shark Tooth Clamping) inside the stem to help grip the bars, 48mm wide faceplate with central bore for reduced weight, unique side pocket detail.
- 6061-T6 alloy
- STC (Shark Tooth Clamping) inside the stem to help grip the bars
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8-inch
- Weight (oz): 10.8
- Stem Type: Top Load
$40.00 - $45.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail.
- Bead-blasted, then anodized
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
- Stack Height: 40
Page 1 of 3
Next page